Detachable Flange Towbar
Exclusive to Witter and only recently introduced this version offers all the versatility of a fixed flange bar whilst leaving very little of the towbar visible when detached.
Suitable for vehicles with reversing sensors
In most instances this system is completely invisible once the neck is removed and therefore preserves the aesthetic appearance of the vehicle
Lockable with a set of two keys provided
Storage bag provided for safe keeping once neck is removed
Tow and carry cycles at the same time
A choice of towing couplings and accessories can be fitted
Detachable Swan Towbar
Mainly used in the rest of Europe and slimmer than a flange bar this style was the first to offer a detachable version. Cycle carriers are available for this type of bar but you cannot tow at the same time.
Suitable for vehicles with reversing sensors
In most instances this system is completely invisible once the neck is removed and therefore preserves the aesthetic appearance of the vehicle
Lockable with a set of two keys provided
Storage bag provided for safe keeping once neck is removed
AL-KO hitches can be fitted
Fixed Swan Neck Towbar
This design of fixed towbar is becoming increasingly popular in the UK. The fixed swan neck towbar is compatible for use with an Alko stabiliser without the requirement of a replacement towball. This design of towbar is less likely to affect reversing sensors due to its slim-line design. Tow-Trust’s fixed swan neck towbar also allows for 20mm of adjustment on the towball height and 20mm of adjustment away from the bumper providing an adjustable towball position to suit your needs. Unfortunately the fixed swan neck towbar is not compatible with common accessories such as bumper protectors or tow-steps and cannot be used for a cycle carrier whilst towing at the same time.
Compatible with AL-KO stabilisers
Less likely to trigger reversing sensors
Cannot be fitted with a bumper shield
Removeable with just two bolts
Fixed Flange Ball Towbar
This is the type of tow bar that has been the UK’s standard fitting for many years. It’s design uses a bolt-on towball and can be used with accessories such as bumper guards and tow-steps. The bolt on nature of this towbar means a range of couplings such as standard 50mm towballs, Alko towballs or pin, ball and jaws can be attached to the face plate. On some commercial vehicles that offer a 4 hole or 6 hole face plate the towball height can be adjusted. Cycle carriers can be fixed behind the coupling of this style towbar allowing for a towing facility and cycles to be carried at the same time.
Tow and carry cycles at the same time (subject to nose load limits)
Bumper shields can be fitted
AL-KO towballs can be fitted
The towing height can be adjusted on commercial and 4×4 four-hole plate towbars
A choice of towing couplings and accessories can be fitted